Description:

?Feature:

1.  Design for airplane, more functions

2.Battery voltage from 12V to 90V for super high voltage version.

3. Two way communication while connecting it with computer.

4. Firmware can be upgraded by user.

5.Motor cable can be inspected while Connecting the power battery

6. Simply set function value by Prog-Box or by PC via USB link wire.

7. Li-MH/Li-Po,Ne-Cd/Ne-mH,LiFe battery can be use.

8. Enables setting the voltage per cell for the point at which the controller’s cut off circuitry engages.Li-MH/Li-Po from 2.0-3.6V,Ne-Cd/Ne-mH 0.4-1.0V,LiFe from2.2-2.8V

9. Reverse function. the delay time of reverse is adjustable

10. The power of the motor forward/ reverse can be set.

11. Automatically detection the throttle route or can be set a fixed number by manual operation.

12. Auto cut off the power within 3 seconds if no radio signs.

13.Timing setting may be adjusted (0°-30°) to suit the motor type.

Motor information:

MOTOR: 12090

KV: 35,55,80,130KV

MAX POWER: 15W

MAX AMP: 300A

CONTINIOUS CURRENT: 180A

TORQUE: 30Nm

RPM: 9500

ESC: 250/300A

MAX VOLT:70

NO LOAD CURRENT (15V) 7A

RESISTANCE (Ohm): 0.16

SIZE: 120 x 110 ( without shaft )

STATOR: 50mm

WEIGHT (kg): 3.5

SHAFT: 12mm

ACCESSORY PACK: Yes