MCT-7000W Tethered Power Supply System 7KW for all Drones in 12S up to 220 Meter altitude for MTOW 50kg Drone w/15Kg Payload (Global Warehouse)

Description:

MCT-7000W Power Supply System for all branded Drones on the market.

Team Austars provide 24/7 technical support w/WhatsApp+610433000015

Features

With Ethernet-Optical Cable 

• Optional Wi-Fi control function by Mobile phone
• Adjustable Output Voltage
• Full CNC aluminum Hard Case  
• LED Display with data info
• Anti-Shock Design
• Compatible with near all branded drones on the market

Technical specifications

Cable length 220m

Output voltage 47-50V/12S

Power (output) 7000W

Cable weight: 4kg/220m

Input voltage 220Vac 50Hz

Cable tensile strength 50kg

Automated Tether Winding

Contain optical fiber cable for data transfer

Ground Station Weight: 40kg 

System base station size 77cm x77cm x78cm (length, width, height)

Air Power Supply (Air Module) Included

Output Power: 7000W w/overvoltage/current protection)

Max Altitude: 5000m w/Temp range -40-125c dgree)

LED display screen: Mainly display company information, product model, current, voltage, power, temperature, winch tension, cable length and alarm code, etc.;

Winch control knob: 0~9 gears, 6.5 gears is the maximum in normal operation, drone is hovering with knob gear level 4.5, over that level, the winch system will pull back the drone;

Cable power knob: The main function is to press and hold the cable for 3s to power on, and then press the cable for 3s to power off; lightly press for 1s to enter the submenu to set the input voltage and alarm power;

System switch: the ON state turns on the power supply of the entire equipment, and the OFF turns off the entire system equipment; press and hold the middle button for 3S to reset the system;

Cable outlet: there is a reciprocating lead screw in the brush, and the cable joint is placed in the brush to reduce the dust and debris from entering;

Alarm light: when there is an error in the system or a precautionary warning is set, it will flash and beep, and you need to tap the cable power to unlock

FC interface: It can be connected to the ground control station and the required display equipment;

220v AC Input Port: operate with the power input cable provided by Austars Team, plug it in to power on;

Cable assembly: input the ground power supply 400~500v DC high voltage power into the airborne power supply, which can pass through 5~14A current;

  On-board power supply: convert the high voltage input from the cable into 48v DC for use by the motor