Description:
Regarding Roto Motor 85cc FS UAV engine (Production & Testing around 20 days)
- There are up to 18 configurations for different solutions.
- The engine has carby version and EFI (Electronic Fuel Injection)
- There are two generator in 400W and 1000W and Voltage regulator in two voltage outputs
Rotomotor makes one key starter (STG/Starter) and EPU (Electric Power Unit)/generator in 1000W and 2000W
STG-EPU (Start Generator-Electric Power Unit)
Rotomotor makes E-Control which Is designed to remote starter, turbo mode, charge and use battery from 12S Lipo battery for the project (servo, RX, camera Gimbal, task payload etc). This is the best solution to integrate other gears (One Key starter/EPU) for long endurance and battery life time circle. It is very useful for both carby version and EFi version
E-Control is an electronic system designed to control the motor generator, which allows the start of the internal combustion engine, charging batteries and hybrid operation, increasing the power of the internal combustion engine
2.1 Absolute Maximum Ratings
Operating temperature: -20°C to +80°C
Non-operational voltage: 9 - 60V DC
Charging current: 45A
Peak power (10 sec): 4300W
Peak current (10 sec): 100A
Safe voltage: 11 - 55V DC
Operating voltage: 12 - 51V DC
Battery configuration: 12 S
Battery nominal voltage: 43.2V DC
PWM frequency: 20 kHz
Controller thermally connected to infinite heat sink which does not exceed 60°C.
Maximal power dissipation: 20W
Nominal power (60 min): 2200W
Nominal current (60 min): 51A
Controller placed in still air of temperature 25°C.
Maximal power dissipation : 10W
Nominal power (60 min): 1500W
Nominal current (60 min): 35A
BMS (Battery Management System) is used for battery lifetime maintenance, which use Lipo, Li-ion, LifePO4 cells or other cells with operation voltage range 1.8V-5V each cell. BMS provides protection and increase the lifetime of the batteries by measuring its temperature, controlling the voltage and flowed current.
Configuration explanation:
If the customer wants to achieve up to 5000 meter altitude and long endurance and long life time of the battery, select Config 85E or F
- Config 85A Carby version engine only,
- Config 85A1 EFI (Electronic Fuel Injection) version engine only.
- Config 85B Carby engine+Generator 400W+Regulator w/two outputs
- Config 85B1 EFI engine+Generator 400W+Regulator w/two outputs
- Config 85C Carby engine+Generator 1000W+Regulator w/two outputs
- Config 85C1 EFI engine+Generator 1000W+Regulator w/two outputs
- Config 85D Carby engine+Starter/EPU (ONE KEY STARTER /POWER GENERATOR) 1000W
- Config 85D1 EFI engine+Starter/EPU (ONE KEY STARTER /POWER GENERATOR) 1000W
- Config 85DA Carby engine+Starter/EPU (ONE KEY STARTER /POWER GENERATOR) 2000W
- Config 85DA1 EFI engine+Starter/EPU (ONE KEY STARTER /POWER GENERATOR) 2000W
- Config 85E Carby engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 1000w)+Lipo battery up to 12s (Owner prepares themselves)+BMS-this is the best solution. The user can achive "remote start, turbo mode, chargingand using power from 12S Lipo battery for the project (servos, RX, camera, gimbal, task payload etc)
- Config 85E1 EFI engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR)+Lipo battery up to 12s (Owner prepares themselves)+BMS-this is the best option.
- Config 85EA Carby engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 2000w)+Lipo battery up to 12s (Owner prepares themselves)+BMS-this is the best solution. The user can achive "remote start, turbo mode, chargingand using power from 12S Lipo battery for the project (servos, RX, camera, gimbal, task payload etc)
- Config 85EA1 EFI engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 2000w)+Lipo battery up to 12s (Owner prepares themselves)+BMS-this is the best solution. The user can achive "remote start, turbo mode, chargingand using power from 12S Lipo battery for the project (servos, RX, camera, gimbal, task payload etc)
- Config 85F Carby engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 1000W)+Lipo battery up to 12s (Owner prepares themselves) w/o BMS
- Config85F1 EFI engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 1000W)+Lipo battery up to 12s (Owner prepares themselves) w/o BMS
- Config 85FA Carby engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 2000W)+Lipo battery up to 12s (Owner prepares themselves) w/o BMS
- Config85FA1 EFI engine+E-Control Starter/EPU (ONE KEY STARTER /POWER GENERATOR 2000W)+Lipo battery up to 12s (Owner prepares themselves) w/o BMS
For 85cc EFI version, Engine Management (EngManager) package with control Module/Panel is optional and supplied, which is designed to manage and control petrol engine from one central injector to four sequential injectors, which the flight control display, input voltage, engine temperature,RPM, timer, fuel level info, Fuel flow info, Altitude correction, injection delay, automatic choke/temperture choke at cold engine start, fue tank volume, fuel indicator calibration/cosumption, fuel pump etc can be adjusted.
The engine management package does not need to be connected to a PC, which is often difficult when running the engine on site. It is optional. This package is not necessary unless the customer wants precision settings.
EngManager includes Main unit, injector, fuel pump, fuel filter, 2pcs CHT sensors, main cable connector, Oxygen sensor, controler for oxygen sensor, Glavanic separation module for ignition, control module, and flight control display.
ROTO 85 FS AL is suitable for UAV projects within the range of 4 meters and weight up to 35 kg.
Four-stroke two-cylinder petrol internal combustion engine
Engine capacity | 80 ccm |
Fuel consumption | 600-920 g/h |
Engine output | 4,1 HP (3,060 Watts) |
Engine weight | from 2730 g |
Arrangement of the engine | boxer |
Cooling | air-cooled |
Lubrication | petrol 95 oct. + 2% oil |
Speed | 1200 – 6500 rpm |
Speed with alternator | 3200 – 6500 rpm (limiter) |
Ceiling | 5000 metres above sea level |
Fuel system | Carburettor (+Altimeter unit) |
Flight modes (lifetime) | 200+ hours if TBO is kept |
Alternator 400W | Alternator 1000W | |
---|---|---|
PMG ( Permanent Magnet Generator) | 3 phase output | |
NdFeB magnets | ||
Voltage curve | 14V/1000RPM (possibility of rewinding according to client) | |
Diameter | 101mm | |
Thickness | 22mm | 25mm |
Weight | 450g | 550g |
Out. Power at 3000RPM | 300W | 430W |
Out. Power at 6000RPM | 600W | 960W |
Cooling | forced by air flow | |
Resistance | to fuel, oil, water, mechanical stress | |
Operating temperature | -30°C to 120°C | |
-
You May Also Like
-
DLA HF 232cc Heavy Fuel UAV/UAS Engine Generator EFI with One Key Start-Auto Starter
USD $14,394.00
-
MDD 550 UAV Engine for Target Drone, UAS, w/One Key Starter/Generator
USD $19,950.00
-
DLE170M EFI One Key Starter/Generator Version (14V/350W Generator)
USD $8,800.00
-
QRS B2G 312cc EFI UAV/UAS Engine TBO300H w/One Key Starter/Generator 24V/2000W
USD $23,000.00
-
QRS B2H 183cc HF UAV/UAS Engine TBO300H w/One Key Starter/Generator 24V/800W
USD $28,700.00
-
QRS B2G 183cc EFI UAV/UAS Engine TBO300H w/One Key Starter/Generator 24V/800W
USD $16,500.00
-
QRS B2H 68cc HF UAV/UAS Engine TBO300H w/One Key Starter/Generator 24V/500W
USD $15,900.00
-
QRS B2G 68cc EFI UAV/UAS Engine TBO300H w/One Key Starter/Generator 24V/500W
USD $11,200.00
-
LIDE B2G170 EFI UAV Engine TBO 300H w/One Key Starter/Generator 24V/400W
USD $9,500.00
-
USD $27,900.00
-
USD $22,900.00
-
USD $15,000.00